PAS Level Setup Guide For Y3

KD1926 Display: PAS Level Setup Guide

  1. Enter the Setting Menu
    Turn on the bike and keep it completely stopped.
    Press and hold the + and − buttons together for 2 seconds. The display will enter the settings menu.
  2. Select 1–5 PAS Mode
    Find the PAS Level Selection menu.
    Press the + or − button until the display shows 0-5 (as pictured), then press the i button to confirm.
    Display showing PAS mode selection screen: 0-5

    Display showing the PAS mode selection screen

  3. Set Speed/Power Ratio for Each PAS Level
    After confirming, the display enters the PAS ratio setting page (as pictured). Adjust each level individually using the recommended values below.
    Display showing power ratio setting screen: 5-1.50

    Display showing the power ratio setting screen for each level

    PAS Level Recommended Setting
    Level 1 20%
    Level 2 40%
    Level 3 60%
    Level 4 80%
    Level 5 96%

    Press + to increase the value  ·  Press − to decrease the value  ·  Press i to save and move to the next level.
    Repeat until Level 5 is completed.

  4. Save and Exit
    After all settings are finished, press and hold the i button for 2 seconds. The display will save automatically and exit the menu.

If you're unsure about the steps for your specific model, feel free to contact support@burchdabikes.com.